SmartDry Hub Setup Trouble shooting (iOS)



If the SmartDry hub fails to setup properly, please follow these steps.


1.      Unplug the hub.

2.      Close the SmartDry completely and restart it.

3.      Verify you have the name and password correct for your 2.4G Wi-Fi network (will not connect to a 5G network)

If you only have one SSID and password SmartDry hub will automatically connect to the 2.4Ghz WiFi.


4.      Plug in the hb and the green LED should be on solid.

5.      Open the SmartDry App and tap the gear to get to the setting page and press “Reset Hub”...This will bring you to the hub setup page where you will continue with the in app steps.


6.      Verify your 2.4Ghz network name is listed beside the “Network SSID:”

(See information below for help identifying your 2.4Ghz network)

7.      Enter your Wi-Fi Network Password

8.      Press “Enter” or "Done"

9.      Wait for a successful connection message and the Hub will reboot automatically.


Once you get a successful setup message you are ready to start using SmartDry.

The hub LED will flash quickly once, then turn off. When the Dryer is running the LED will flash as it listens for

data from the sensor.


If it continues to fail. Verify you have the correct password.

Check that the network is not a 5Ghz network, only works on 2.4Ghz Wi-Fi


How can I tell if my Wi-Fi is 2.4 GHz?


SmartDry can only be connected to the 2.4 GHz band on Wi-Fi routers or access points.


Please keep in mind:


-All Wi-Fi routers have a 2.4 GHz band.

-Newer routers are often dual-band router, with 2.4 GHz and 5 GHz bands.

-If both of your 2.4 GHz and 5 GHz Wi-Fi bands have the same name (SSID) and password, you will not have any problem connecting your Smart Home device regardless of which Wi-Fi network band your smartphone is connected to. You do not need to read further.


Easy check of your smartphone's Wi-Fi connection

To find out whether you need to connect to a different Wi-Fi network to set up your device, go to Settings>Wi-Fi (or Wireless & Networks) on your smartphone.


How many Wi-Fi networks do you see that belong to you?

I see ONE network: If you only see one Wi-Fi network name that belongs to you, you can proceed with setting up your device with this Wi-Fi connection.


I see TWO or more networks: If you see two or more Wi-Fi network names that belong to you, then one may be a 5 GHz band.


I have more than one network name that belongs to me. How do I identify my 2.4 GHz band network?

From your smartphone's Wireless settings page, look at the names of your Wi-Fi networks.


A 2.4 GHz network may have "24G," "2.4," or "24" appended to the end of the network name. For example: "Mynetwork2.4"

A 5 GHz network may have "5G" or "5" appended to the end of the network name, for example "Mynetwork5"